Hewlett Packard Deskjet 930c Driver Windows 7

by



  • DRIVERS HP 930C WINDOWS VISTA DOWNLOAD. Adobe acrobat reader, printers drivers windows, ink cartridges printer ink, easy driver pro, officejet pro k550, black inkjet print cartridge, inkjet printer hewlett packard, new specs related drivers. Hp deskjet 930c en.
  • This utility contains the only official version for HP DeskJet 930C/932C/935C Driver for Windows XP/7/Vista/8/8.1/10 32-bit and 64-bit versions.
  • Driver for deskjet 930C for windows 7. Is there anaybody who can help me I try to install hp deskjet 930c in windows 7 but no driver is found. Can you help me?

Hi, I'm from Brasil. I try install HP Deskjet 930c in Windows 7 Ultimate x64. I don't have sucess. Any help-me ? Sorry my english.

Driver

Download the latest drivers, firmware, and software for your HP Deskjet 930c Printer.This is HP’s official website that will help automatically detect and download the correct drivers free of cost for your HP Computing and Printing products for Windows and Mac operating system.

Notivago wrote:
I'm also from Brazil and I'm expecting the same problem in both x386 and x64 versions. But this solution dind't work for me. When i click 'windows update', the system seeks about one minute and then pop up a message saying Windows couldn't take a devices list from Windows Update. Try again later. I don't know whatelse I can do.
OK, it is not quite a direct link but try the following: go to the Microsoft catalog update site
(you will need to use Internet Explorer, not Firefox or some other
browser). In the search box select Deskjet 930c then press enter. There will be several choices presented, the 11.4MB file is the 32 bit version and the 11.6MB file is the x64 version. You can click on each title and verify which one is the proper architecture.
Bob Headrick, HP Expert
I am not an employee of HP, I am a volunteer posting here on my own time.
If your problem is solved please click the 'Accept as Solution' button ------------V
If my answer was helpful please click the 'Thumbs Up' to say 'Thank You'--V

Solved: Driver for HP deskjet 930c - HP Support Community ...Hewlett Packard Deskjet 930c Driver Windows 7

Similar Messages

HP Deskjet 930C Has No Drivers For Windows 7 64bit ...

  • Hi,
    I've successfully installed the Deskjet 3420 onto the Windows 7 x64 system. However, I can't get it shared to my 32 bit XP system. When I try to install additional drivers, and I use either the 32 bit Deskjet 3420 XP driver or the 32 bit 3600 series XP driver, it fails saying that the processor architecture isn't supported.
    If I just try and install the drivers on the XP system, it complains that the 'specified location does not contain information about your hardware'.
    Any help would be greatly appreciated,
    Thanks

    bump

  • I can't find any way to install the driver for my Hp deskjet 1280, printer, not on the site, not in the instalation wizard, anyhwere, I saw on other forums that there were some tips; like using the Hp Deskjet 1220(c) driver from the instalation wizard in Windows, which is compatible with the 1280 printer, but there is no Hp Deskjet 1220(c) driver, only other models of Deskjet, which I have tried and they don't work with this printer. I hope you can help me.
    Thank you

    HI Slim2,
    I am sorry to say, there is no driver or full feature software for the Deskjet 540 for Windows 7. The only available driver is for Windows XP. You may consider getting a newer printer. I would suggest you call HP. HP might be able to offer you a discount on a newer model.
    The number to call HP is 1-800-474-6836 for Canada and US , or you can Contact HP Worldwide.
    Please click the Thumbs up icon below to thank me for responding.
    ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
    Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
    Sunshyn2005 - I work on behalf of HP

  • Have been Online in HP support and folllowed all steps and that didnt work. Called HP rep and that didn't work. Hp still sell the cartridges, so not sure why I can't get drivers for my printer.

    You may need to talk to your system administrator. Many IT departments restrict what drivers or devices can be added by standard users.
    If the driver is not available try the following: Start, Devices and Printers, Add a Printer, Local Printer, LPT1: (for now, will address this later), Next, Windows Update and wait for the list to repopulate. This will take a few minutes, but at this time the Deskjet 930/932/935 should be available under manufacturer HP (not Hewlett-Packard). At this point hit cancel, then connect the printer's USB and it should be installed automatically.
    You could also download the driver from the Microsoft Catalog site. You will need to use IE for this, other browsers are not supported. The driver you will want for a 32 bit system is the one 11.4Mb in size.
    Bob Headrick, HP Expert
    I am not an employee of HP, I am a volunteer posting here on my own time.
    If your problem is solved please click the 'Accept as Solution' button ------------V
    If my answer was helpful please click the 'Thumbs Up' to say 'Thank You'--V

  • I am trying to install the Deskjet 930c in Windows 7 32bits and I am not obtaining.

    The Deskjet 930 driver is downloaded through Windows Update. You may need to enable Windows Update as described in Method 2 here. Try the following: go to the Devices and Printers folder, Add a Printer, Local Printer, Create a Port, Local Port, ComputernamePrintername (use the actual share name for the computer and printer), OK, then click on Windows Update and then select HP (not Hewlett-Packard) Deskjet 930 series.
    Bob Headrick, HP Expert
    I am not an employee of HP, I am a volunteer posting here on my own time.
    If your problem is solved please click the 'Accept as Solution' button ------------V
    If my answer was helpful please click the 'Thumbs Up' to say 'Thank You'--V

  • I read the thread Widows 7 printer
    HP deskjet 855c driver about possible installation of HP855c drivers onto Windows 7 x64 from 'Windows Server 2003 x64' CD but I didn't have enough luck to succeed with doing it on my laptop. That thread appears to be dead now
    as it is marked 'Answered', so I'm asking for help here. I have Toshiba Satellite P500 with Windows 7 Home Premium 64-bit (http://i55.tinypic.com/2zgth6v.jpg).
    Let me tell you first that I don't have access to Windows Server 2003 x64 or XP Pro 64 CD's. However I did some research online, which eventually forced me to learn about the 'file sharing'. After extensive search I was able to get the copies
    of AMD64 folders from Windows Server 2003 R2 Standard x64 with SP2 and
    XP Pro 64. The reason that I went also after XP Pro was because I thought that the extra wording 'R2 Standard x64 with SP2' in description of 'Windows Server 2003' did not reflect the exact name provided by poster
    Alan. I couldn't find just 'Windows Server 2003 x64' (does it matter?).
    Anyway, I followed first the drill with running 'printui /s /t2' and disabling UAC, and then in both cases I was able to locate the
    NTPRINT.INF file (http://oi51.tinypic.com/9qwvt2.jpg - this image is from XP Pro AMD64 folder) but each time when I
    attempted to install the driver, I got the same message stating:
    'The folder you specified doesn't contain a compatible software drive for your device. If the folder contains the driver, make sure it's designed to work with Windows for x64-based systems.' (http://oi53.tinypic.com/27yveiw.jpg)
    Why aren't there x64 drivers?
    During several installation attempts I had the printer connected to or disconnected from my laptop. It didn't make any difference. I must add that for this purpose I had to use different cable than the original one designated only for the
    Parallel port in my old desktop with Windows XP. My new laptop with Windows 7 x64 came only with 3 USB ports (plus 1 HDMI and 1 Serial). Because of that situation I bought in advance a new printer cable called “USB to 36-pin Parallel Port Adapter
    Cable” (http://www.amazon.com/gp/product/B003A8I75E). I'm not sure, if it will work until I can install the printer.
    Besides, nobody talked about this issue yet. I was also playing with the port choices in 'Add printer' step; changing from default LPT1 to USB001 with the same negative results.
    I don't know what I'm doing wrong. I was very hopeful after reading positive 'case closed' notes there.
    Can anyone help me here, maybe by making the necessary files available for download? I'm willing to pay for such assistance or make a donation, if necessary. Seriously. Judging by the large number of views of the original
    thread, one could assume that there is a potential demand for such service. It would be more human to pay few bucks for a few driver files than $900 for the whole Windows Server 2003 x64 CD, no? Can Microsoft accomodate me/us, please? :)
    Andrew*
    P.S. I was advised to come for help here from
    http://answers.microsoft.com/en-us/windows/forum/windows_7-hardware/windows-7-x64-cant-readinstall-any-printer-drivers/4e7d06e1-33a5-4597-be70-4fdc087a63a7?msgId=9a045994-0d31-4d40-b17d-dba372393ee4

    I have my HP 855c/driver working on Win 7 Ultimate x64. I used the 'printui /s' procedure and 4 files described above with some minor changes.
    I pulled WindowsServer2003.WindowsXP-KB914961-SP2-x64-ENU.exe down from the Microsoft website. Running the file causes the exe to unpack into a temp folder at the root drive. A 'Setup Error' message box is displayed once the file is run. I left this
    message box up until I copied ntprint.inf, ntprint.cat, and sp2.cab from the temp folder.
    I copied driver.cab from a Windows XP Pro disc. I also needed amd64stdnames.gpd which was already in my Windows 7 c:windowssystem32spooldriversx643 folder.
    I created a folder with the 5 files (ntprint.inf, ntprint.cat, sp2.cab, driver.cab, and amd64stdnames.gpd). This is my 'Have Disc' folder.
    I followed the 'printui /s' instructions, first changing the permissions mentioned above and then installing the driver. Next I followed the instructions to add a printer from Control Panel 'Devices and Printers' - 'Add Printer', choosing to 'use an existing
    driver' when installing the HP 855c.
    I used a slightly different ntprint.inf, size 1570418. The readable contents of ntprint.inf is as follows. Notice the line 'CatalogFile=ntprint.cat' is not included. I tried using the 1570468 version of ntprint.inf; when I did I received an incompatibility
    message (probably the same one mentioned above).
    ; NTPRINT.INF (for Windows Server 2003 family)
    ; List of supported printers, manufacturers
    [Version]
    Signature='$Windows NT$'
    Provider=%MS%
    ; LayoutFile=layout.inf
    ClassGUID={4D36E979-E325-11CE-BFC1-08002BE10318}
    Class=Printer
    DriverVer=10/01/2002,5.2.3790.4533
    [ClassInstall32.NT]
    AddReg=printer_class_addreg
    [printer_class_addreg]
    HKR,%PrinterClassName%
    HKR,Icon,'-4'
    HKR,Installer32,'ntprint.dll,ClassInstall32'
    HKR,NoDisplayClass,1
    HKR,EnumPropPages32,'printui.dll,PrinterPropPageProvider'
    Good luck

  • We have just obtained a new machine with Windows 7 and connected the existing Deskjet 930c via a usb cable.
    Under windows XP it was possible to select double sided printing and a prompt was displayed on the screen to turn the paper round.
    This is not happening under windows 7. Is there something we have not done? Or is it not possible any more.
    It does go through the motion of double sided printing but does not stop to change the paper.
    Any ideas anyone - we do a lot of double sided printing and we hav spent hours trying to sort this out.

    Please look at the HP Support page,
    http://h10010.www1.hp.com/ewfrf/wc/document?docname=c00098827&lc=ja&dlc=ja&cc=jp
    Unfortunately, I could not find an equivalent page in English. This is for Win XP and Vista, but I checked
    that a similar logic can be applied to Windows 7, too.
    step 1 to 3 is to show property of the printer Deskjet9xxC.
    step 4 is to select device setting tab
    step 5: change 'installable option' from 'uninstalled' to 'already installed'
    step 6: OK
    step 7: select print setting
    step 8: select layout tab, and choose either long edge or short edge
    that is all.
    In my Japanese Windows 7 environment, when I double-click the 'HP DeskJet 930C/932C/935C' icon, there are three sub items appeared. Two out of these three were used in the above steps.
    Please try.
    PaperlessUK wrote:
    We have just obtained a new machine with Windows 7 and connected the existing Deskjet 930c via a usb cable.
    Under windows XP it was possible to select double sided printing and a prompt was displayed on the screen to turn the paper round.
    This is not happening under windows 7. Is there something we have not done? Or is it not possible any more.
    It does go through the motion of double sided printing but does not stop to change the paper.
    Any ideas anyone - we do a lot of double sided printing and we hav spent hours trying to sort this out.

  • My laptop has Windows 7 (x64 bit) and I'm trying to print to an HP 990cxi attached to an XP x86 machine. The driver for Windows 7 is apparently at Windows Update but how do I trigger the download without physically connected the printer to the laptop?
    Dave.

    OK, OK. Honestly, I am not very good with printer sharing, especially across OS's, but I'll give it a shot.
    First, just to be clear, the printer is attached to an XP machine via USB and you are trying to print to it via a router, right?
    Let's try the straightforward approach:
    1. Enable the Guest Account on the XP machine.
    2. On the Mac, go to System Prefs > Print & Fax, click the '+' sign to add a printer and then click the Windows icon at the top.
    3. Navigate to the XP machine, you may have to login to it.
    4. Choose the proper driver from the pull-down. If it does not exist, choose a Gutenprint driver.
    Again, I am not very experienced with this - let me know how it goes.
    Say thanks by clicking 'Kudos' 'thumbs up' in the post that helped you.
    I am employed by HP

  • I had installed windows 7 32bit beta, then uninstalled and I installed windows 7 64bit currently. With both OS, whenever I turn off the computer, after few seconds power light blinks and sounds like printer is initializing and then slowly my HP DeskJet 930C ejects a blank paper even though I have nothing in waiting to be printed or in queue. I have updated latest drivers for my HP computer and also for HP DeskJet 930C. I have google it for solution, but no answer. So I don't know whether it's a bug or compatibility issue. With Windows XP I didn't have problem.
    I have following Computer info for HP Compaq dc7800p Convertible Minitower :
    Computer Type ACPI x64-based PC
    Operating System Microsoft Windows 7 Ultimate
    OS Service Pack -
    Internet Explorer 8.0.7100.0
    DirectX DirectX 10.1
    Computer Name DAN-PC
    User Name Dan
    Logon Domain Dan-PC
    Date / Time 2009-06-02 / 08:54
    Motherboard:
    CPU Type DualCore Intel Core 2 Duo E6550, 2333 MHz (7 x 333)
    Motherboard Name Hewlett-Packard HP Compaq dc7800p Convertible Minitower
    Motherboard Chipset Intel Bearlake Q35
    System Memory 6064 MB (DDR2-800 DDR2 SDRAM)
    DIMM1: Aeneon AET760UD00-25DB97X 1 GB DDR2-800 DDR2 SDRAM (6-5-5-18 @ 400 MHz) (5-5-5-18 @ 400 MHz) (4-4-4-12 @ 266 MHz)
    DIMM2: OCZ XTC SLI OCZ2N800SR2G 2 GB DDR2-800 DDR2 SDRAM (6-6-6-18 @ 400 MHz) (5-5-5-15 @ 333 MHz) (4-4-4-12 @ 266 MHz)
    DIMM3: OCZ XTC SLI OCZ2N800SR2G 2 GB DDR2-800 DDR2 SDRAM (6-6-6-18 @ 400 MHz) (5-5-5-15 @ 333 MHz) (4-4-4-12 @ 266 MHz)
    DIMM4: Aeneon AET760UD00-25DB97X 1 GB DDR2-800 DDR2 SDRAM (6-5-5-18 @ 400 MHz) (5-5-5-18 @ 400 MHz) (4-4-4-12 @ 266 MHz)
    BIOS Type Compaq (07/18/07)
    Communication Port Communications Port (COM1)
    Communication Port ECP Printer Port (LPT1)
    Display:
    Video Adapter NVIDIA GeForce 9500 GT (1024 MB)
    Video Adapter NVIDIA GeForce 9500 GT (1024 MB)
    3D Accelerator nVIDIA GeForce 9500 GT
    Monitor Samsung SyncMaster 910M/910V/913V [19' LCD] (H9NXA09099)
    Multimedia:
    Audio Adapter Analog Devices AD1884 @ Intel 82801IB ICH9 - High Definition Audio Controller [A-2]
    Storage:
    IDE Controller Standard Dual Channel PCI IDE Controller
    IDE Controller Standard Dual Channel PCI IDE Controller
    IDE Controller Standard Dual Channel PCI IDE Controller
    Disk Drive ST3160812AS ATA Device (160 GB, 7200 RPM, SATA-II)
    Optical Drive HL-DT-ST DVD-RAM GSA-H60L ATA Device (DVD+R9:10x, DVD-R9:10x, DVD+RW:20x/8x, DVD-RW:20x/6x, DVD-RAM:12x, DVD-ROM:16x, CD:48x/32x/48x DVD+RW/DVD-RW/DVD-RAM)
    SMART Hard Disks Status OK
    Peripherals:
    Printer Fax
    Printer HP DeskJet 930C/932C/935C
    Printer Microsoft XPS Document Writer
    USB1 Controller Intel 82801IB ICH9 - USB Universal Host Controller [A-2]
    USB1 Controller Intel 82801IB ICH9 - USB Universal Host Controller [A-2]
    USB1 Controller Intel 82801IB ICH9 - USB Universal Host Controller [A-2]
    USB1 Controller Intel 82801IB ICH9 - USB Universal Host Controller [A-2]
    USB1 Controller Intel 82801IB ICH9 - USB Universal Host Controller [A-2]
    USB2 Controller Intel 82801IB ICH9 - USB2 Enhanced Host Controller [A-2]
    USB2 Controller Intel 82801IB ICH9 - USB2 Enhanced Host Controller [A-2]
    USB Device Generic USB Hub
    USB Device Unknown
    USB Device USB Input Device
    USB Device USB Printing Support
    PnP INT5400: Motherboard resources [NoDB]
    Please help me with this issue.
    Thank you.

    The cartridges do have a shelf life, although typical failures for out of date color cartridges would be cyan or yellow failing, it would be unusual for all three colors to fail. You can check the cartridge dates as shown in this page.
    You could verify the issue is the cartridge by removing the cartridges and gently blotting the printhead on a damp tissue. Good cartrdiges will give a strong stripe of cyan, magenta and yellow for the #78 and two strong strips of black for the #45. If the cartridges do not give a strong blot (or have no blot at all) a fresh replacement cartridge may resolve your issue. You may be able to recover an old cartrdige by soaking the cartridge nozzles down in about 1' of very hot water for ten minutes or so.
    If the cartridges do give a strong blot on the tissue but nothing on the page then it is possible there is an electrical issue with the printer drive electronics. This would not be economical to repair.
    Bob Headrick, HP Expert
    I am not an employee of HP, I am a volunteer posting here on my own time.
    If your problem is solved please click the 'Accept as Solution' button ------------V
    If my answer was helpful please click the 'Thumbs Up' to say 'Thank You'--V

  • ok, after spending days on this with about 10+ clean installs on 2 different machines and searching forums about various problems, i'm going to go step by step in a flow-chart like manner to describe the steps and various pitfalls in getting windows 7 ultimate 64 bit installed correctly on a macbook (late 2009)...most of this i didn't figure out on my own, this is a compilation of solutions found by others. i'll try and link or credit anyone i can, but honestly can't remember where i saw all of this. part of this is to share my days of frustration to try and save someone some time. also, in case i have to do this again, i want a record of it so i don't have to start from scratch next time.
    i don't have everything working perfectly, but i have wireless and sound, but not sure if all the drivers are up to date. i'm still working on the headphone issue, i don't have sound yet with headphones, but i got the speakers to work.
    i'm going to preface this by saying that windows 7 is a horrible piece of software, i'm only helping a friend do it because she's an architect and needs autocad, but she wants a mac for daily use. also, i'm doing this from a spanish install of windows 7 (here in south america), so it's a pain to translate this cruddy convoluted OS into english as i'm not familiar with windows 7 anyway, so i'll do my best. i'm not a pc expert. also going to say that the windows 7 x86 and x64 installs i've done on a couple macbook pro 15's seems to work much better (full trackpad functionality, expose works) and without as many problems...i don't know why it doesn't seem to work as well in x64 on the macbook, i'm still investigating.
    also, i want to say that a fresh (first-time) bootcamp partition with windows install after a clean mac os x install seems to produce the best results. i say this because i wasn't happy with all the hacks in my first couple attemtps, so i erased the bootcamp partitions and re-created them to re-install windows 7 again. but i started experiencing some peculiarities that never happened in the first install after a clean Mac OS X install. it's as if the computer leaves artifacts from previous installs and acts funny. also, reboots and start-up times seem to be slower now than when it was a first-time fresh install. anyway, i'll try and outline all the weirdness here, indicated by asterisks *
    SO, HERE GOES:
    1) Go to Bootcamp Utility > Create Bootcamp partition
    2) Afterwards, this should take you to a restart into the windows install dvd....if install dvd boots fine, skip to step 3
    ** if you get a gray screen (happened to me after subsequent re-install attempts), you have to power off and reboot holding down 'C' key to boot from the dvd...or you can hold down alt/opt key to get the icons of bootable volumes, at this point it should be mac os x and the windows dvd. the point is, force it to boot from the dvd if it hangs on re-start.
    3) Windows install should start. Select language, etc....You should then get to a screen listing all the partitions (should be 3 of them). Choose the Bootcamp partition and format (erase) it to proceed with the install.
    4) Windows should start installing all the files and will reboot a couple times, here's where things get weird possibly. On the first attempt at installing Windows 7, the install went smoothly on restart.
    ** some of you might get a blinking cursor and a black screen that goes on forever. Supposedly this is a bug in Windows 7, having to do with video drivers or something. I don't understand because my first install attempt, it rebooted just fine and the installation continued.
    anyway, what you have to do here if you get the forever-black screen is power down the machine with the power button and restart holding the alt/option key. this time when you get the bootable volumes on the gray screen, choose the Windows partition, which will now appear. DON'T boot up from the DVD. upon restart into Windows, you should be back in the installation process and it will attempt to finish the install here.
    it might be my imagination, but once i had to reboot into the dvd here to actually finish the install. technically Windows is not finished installing at this step, you just have to figure out how to get past the black screen to finish the install. try both.
    5) Windows should go back to where it left off before the restart, then finish the install.....and restart AGAIN. On my first attempt, the restart went smoothly and started the 'first time user' process...
    ** some of you will get the black screen YET AGAIN, this happened to me on my subsequent attempts at re-installing Windows. again, you need to power off and start up holding the alt/option key, choose the Windows partition and it should take you to the 'first time user configuration' process....since at this point, windows is indeed installed.
    6) Here you will fill out all your information, product key, etc...and get into Windows. Here you will have some other problems.
    Problem #1: you have no drivers to run Windows on your Mac, so you will need to install Bootcamp in windows from your Mac OS X install dvd
    Problem #2: you have no 'right click', because you don't have drivers, so you might not be able to eject the Windows dvd to put in the Mac dvd
    Solutions: you can't control-click or right click, BUT YOU CAN hover over the DVD drive ( 'D:' in your computer, my PC or whatever it's called in english) and see if there's an 'eject disc' option.
    for some reason, my Windows dvd was spinning and not being recognized, so i just rebooted (alt/option) into Mac OS X and ejected the disc there. the point is, you need to eject the Windows disc and put in the Mac OS X install disc to access Bootcamp for Windows.
    7) Reboot into Windows (if you had to boot into Mac to eject the disc). Insert Mac OS X install disc. Navigate to BootCamp setup.exe and run it.
    ** the first time i did this, it ran no problem. but in subsequent attempts, it gave me the 'x64 not supported by this computer' message that everyone seems to encounter. there is a bypass for this outlined here:
    http://www.techulous.com/hardware/how-to-apple-boot-camp-64-bit-for-windows-7-on -unsupported-macs.html
    8) Ok, so now you should have Bootcamp 3.0 installed. Now you need to update it with Bootcamp 3.1 update. Download it here and run it. This is required for 64 bit support, I believe this is the link:
    http://support.apple.com/kb/dl979
    ** hopefully you don't have problems, i didn't, so you might have to search the forums since i can't anticipate what might happen here, it worked for me every time.
    9) Ok, i think it might reboot after the update install. Now you have Bootcamp installed and most of the drivers you need, however not everything works. Some of the drivers will be out of date.
    Problem #1: you may or may not have updated nvidia drivers. mine are ok, but check nvidia website if you have doubts. most of their drivers are for PC hardware, however, so the ones on the bootcamp disk and update should be fine.
    Problem #2: almost everyone has wi-fi connectivity problems. it has to do with the wrong/outdated broadcom drivers from bootcamp. i will outline how i got it to work (based on someone else's solution i found in some forum or other).
    Problem #3: almost everyone is having sound issues. i'll explain what i did. i still have no sound coming out of the headphone jack, i'm working on that next. but i have speaker sound and no red light coming out of the headphone jack.
    ** first of all, you should probably download firefox from internet explorer in windows, then update adobe flash, it's a pain....i used another computer to download the drivers, then transfered them by USB drive, but you can do it however u want.
    Solution to wi-fi: ok, not sure where i got this information, but i downloaded HP drivers in a file called 'sp45524.exe'....here's the link:
    http://www.wireless-driver.com/download/hp/hp-broadcom-wireless-lan-windows7-dri ver-v560188.htm
    apparently the broadcom drivers in Bootcamp 3.0 and 3.1 update won't install on Windows 7 x64 for some reason, lot of people are getting 'code 10'.
    what i did is this:
    9a) run the .exe file, it will create a folder called SWSetupSP45524 that will house the drivers. there's a setup file in that folder, i didn't try it. perhaps it will install from there, but everything i read suggested a different step. ** if you run the set up file, you may have to run as administrator, or use the 'troubleshoot compatibility' trick to get it to work.
    9b) Go to Control Panel > Hardware and Sound > Device Manager > Network adapters
    you should uninstall or deactivate any drivers you have. if it's not showing any wi-fi adapter, right click and 'check for new hardware' (not sure how it's translated into english from spanish)....you should have an unknown device pop up with the yellow icon and exclamation mark. double click on that, assign it as a network adapter.
    when you get to the driver tabs, you can install it from there. this is where it gets tricky. click 'install driver', 'check drivers on this computer', 'choose from a list of drivers on this computer', 'use disc', and in the dialogue box ('install from disc' that says 'copy manufacturers files from', navigate to the C: SWSetup|SP45524 folder and click until you can accept. this will load up a different list of drivers.
    (sorry, i'm translating the Windows from spanish to english, and i'm not familiar with exactly what they say in english, so you'll just have to use your imagination)
    you should now have a small list of drivers. personally, i chose the first one on the list 'Wi-Fi adapter Broadcom 43224AG 802.11a/b/g/draft-n', but the second one worked also. again, i'm doing this on a late 2009 white macbook (6.1) and it works. according to the date of the driver, it seems like it might not even be the most current and might be older than the one that's on the MAC OS X install disc, but none of the ones on the disc work. this one does. (thanks to whoever found this out, i can't find the original link of the post with this driver reference).
    Solutions to sound: ok, there are multiple posts on this, everything from updating realtek to sigmatel...personally what worked for me was to download the most current Cirrus Logic drivers.
    everyone has been pointing to this post:
    http://www.stuffedcow.net/macbook_audio
    it doesn't really tell you what to do exactly. i'm not even sure what to do, but here's what i did. actually, i downloaded what was supposed to be the CS4207 driver here:
    http://www.cirrus.com/en/products/pro/detail/P1233.html
    then i followed the same procedure as before with the network adapter driver....'install driver', 'check drivers on this computer', 'choose from a list of drivers on this computer', 'use disc', and in the dialogue box ('install from disc' that says 'copy manufacturers files from', navigate to the folder you just downloaded from the above link.
    you should have an updated list of drivers. what i don't understand is that the Cirrus site lists the most current driver as CS4207, but the only thing that has 4207 in it starts with CDB. in any case, i chose the last one on the list, CS4206A (AB 99).
    i have no idea why i chose that, it just seemed to be the most current. in any case, sound works now.
    Ok, i tested all this stuff in skype. wifi, microphone and speakers work, isight works. however, still no headphone sound. so if anyone knows how to fix that, please let me know. i haven't gotten to that part yet. but i've spent like over a week trying to figure this out. windows 7 is so horrible that there seems to be so many steps to getting it just right, and i just found myself starting all over (i didn't mention the nightmare with license breaks with AutoCad due to windows reading the clock differently...that's another hack that i had to deal with...and failure meant re-installing everything).
    ok, off to bed now....

    Windows 7 x64 all updates
    Just doublechecking. Does that include the recent chkdsk hotfixes?
    [The Chkdsk.exe program does not start correctly on a Windows 7-based computer|http://support.microsoft.com/kb/975778]

  • Windows XP X64 Soundmax ADI1986A Sound drivers
    Does anyone have these drivers >>> Soundmax ADI1986A FOR WINDOWS XP X64
    There is a X64 version working under Vista X64 Ultimate provided by the Lenovo site, but for XP X64 i found none.
    I must say, with the UAA Driver for High Definition Audio 1986A X64 Windows 2003 installed, there is sound only in my headphones (so the jack is working) , but the speakers are off. I really do not understand how this comes.
    Does anyone confronted with this issue ? Does anyone has a working XPx64 ADI1986A sounddriver ?
    ( I forgot to tell the notebook model lenovo 3000 N100 0768-bng intel core2duo T5500 )
    Message Edited by adrian_butan on 01-04-2009 02:05 PM

    I am in deep trouble finding those x64 drivers.
    For the Bluetooth stack, it complains about being unable to find the Bluetooth device. It keeps on saying 'Please plug in the Bluetooth device.'. Nothing more...
    For the sound card, Analog Devices does not provide drivers to individuals. Instead, they forward you to the OEM manufacturer web site, in our case the Toshiba downloads site, where you can find nothing.
    I understand that Toshiba is not delivering those machines with 64 bit operating systems.

  • Hi There,
    My application is written in VS2005 C# on x86 machine. It runs smoothly on XP pro and Vista x86 machine.
    I deployed the same to windows 7 x64 machine with CRRedist2005_x64.msi and found that the Print Report button is not working.
    So, I re-compiled my application to x64 target platform, and reinstall the application to the same machine. But nothing changed. I have surf for answer over the web but nothing found.
    Please help urgently. Any helps is much appreciated. Thks in advance.
    Edited by: chanpyvivian on Mar 26, 2010 11:14 AM

    I follow your instruction as below:
    1) download the sample app vbnet_win_printtoprinter.zip to dev computer and compile it to .NET 2005.
    - Run from my dev computer
    - Click 'Print Report' button
    - Error message display - please see below
    The error was due to the default printer name hard coded in the program was not found. I have edited to my printer name and it can be printed out with no error.
    2) Use a 'saved data' report so that you do not have to worry about database logon.
    can't find the 'saved data', please elaborate
    3) Then copy the exe to the 64 bit box and try to print using this sample app.
    -do you mean copy the exe to the 64 bit computer for testing ?
    ERROR Message
    CrystalDecisions.CrystalReports.Engine.InvalidArgumentException:
    Invalid printer specified. ---> System.Runtime.InteropServices.COMException (0x80000201):
    Invalid printer specified.
    at CrystalDecisions.ReportAppServer.Controllers.PrintOutputControllerClass.ModifyPrinterName(String newVal)
    at CrystalDecisions.CrystalReports.Engine.PrintOptions.set_PrinterName(String value)
    at CrystalDecisions.CrystalReports.Engine.PrintOptions.Copy(PrintOptions src)
    at CrystalDecisions.CrystalReports.Engine.ReportDocument.Load(String filename, OpenReportMethod openMethod, Int16 parentJob)
    --- End of inner exception stack trace ---
    at CrystalDecisions.ReportAppServer.ConvertDotNetToErom.ThrowDotNetException(Exception e)
    at CrystalDecisions.CrystalReports.Engine.ReportDocument.Load(String filename, OpenReportMethod openMethod, Int16 parentJob)
    at CrystalDecisions.CrystalReports.Engine.ReportClass.Load(String reportName, OpenReportMethod openMethod, Int16 parentJob)
    at CrystalDecisions.CrystalReports.Engine.ReportDocument.EnsureLoadReport()
    at CrystalDecisions.CrystalReports.Engine.ReportDocument.get_FormatEngine()
    at CrystalDecisions.CrystalReports.Engine.ReportDocument.PrintToPrinter(Int32 nCopies, Boolean collated, Int32 startPageN, Int32 endPageN)
    at PrintToPrinter.Form1.Button1_Click(Object sender, EventArgs e) in C:CrystalCRNETvbnet_win_printtoprintervbnet_win_printtoprinterForm1.vb:line 91
    OK
    Edited by: chanpyvivian on Mar 30, 2010 6:18 PM

  • iTunes 9 Home Sharing does not work on Windows 7 x64.
    Getting the following error message:
    Home sharing could not be activated because this computer is not authorized for the account 'iTunes account.' Please authorize this computer and try again.
    This is a bug since my computer is authorized in iTunes and there is only 2 computer authorized for my iTunes account, so I have 3 more left till I should get this message.
    I've just upgraded my iPhone to OS 3.1 using it this morning.
    Please advise.
    Environment: Windows 7 x64, HP TouchSmart tx2-1020us Notebook
    Ivan Farkas
    <edited by host>

    I am using Windows 7 x64.
    I am running iTunes 9.0.2.25
    I am running Mcafee.
    I can see and play music from the iTunes installation on my Windows 7 machine, but I CANNOT access the library to copy songs from this computer to other computers on my network.
    YES, I have enabled 'Home Sharing' using my iTunes account. NO, I have not authorized more than 5 computers on this account.
    I believe this to be a Windows 7 related issue, as Home Sharing worked as advertised when I was using Vista (before I upgraded to Windows 7).
    I CAN set up Home Sharing on two other (host) computers in my home network and it works. These computers are XP and a MacBook Pro. I CANNOT access my Windows 7 machine x64 to COPY music from one autorized library to another. Please help!!!
    P.S. - I have attempted to get this to work by turning OFF my McAfee firewall. Windows firewall is disabled.
    Message was edited by: turcott

  • Hello!
    I have the same problem!!!
    Notebook HP 15-d053sr, Product No. F7R72EA#ACB, Serial No. [edited by Moderator], Bios Version F.11
    On clean install Windows 7 x64, Can't install all Chipsets, USB 3.0 and Video drivers! Error message: 'This computer does not meet the minimum requirements for installing the software'
    On clean install Windows 8.1 x64 Can't install 'IMEI' (sp64344) driver and maybe more!
    HP Support Assistant find only 4 drivers (Atheros Bluetooth, Wireless LAN, Synaptics TouchPad and Realtek Audio drivers)...
    Need working, supported, compatible drivers for Windows 7 x64!
    Please HELP!!!

    Hi @Ainars_LV ,
    Thank you for visiting the HP Support Forums. I'm sorry to inform you that your post has needed some editing to remove personal information such as the Serial Number in your Post. From our Rules of Participation:
    Protect privacy - yours and others'. Don't share anything about yourself that you would not want to see on a road-side billboard. Don't post contact or other personal information-your own or anyone else's-or any content that you receive in one-to-one communications without the author's consent. For example, don’t post your computer’s serial # or contact information publicly, and do not allow someone you don’t know to remotely take control of your computer.
    If you need people to contact you directly, either ask them to send you a private message or subscribe to the thread so you will be notified when there are replies. You may also click on your name anywhere in the forum and you will be taken to your profile page, where you can find a list of threads you have participated in.
    Sharing personal email addresses, telephone numbers, and last names is not allowed for your safety. If you have any questions feel free to send me a private message in reply.
    Thank you
    George
    I work for HP

  • There was an earlier post about this that has been archived prematurely that I will reproduce below. The main issue is a flaw in the Windows 7 x64 CHKDSK of the SSD drive in the mid-2009 MBP= 5,2. With fresh OSX installs, bootcamp 3.1, Windows 7 x64 all updates, the CHKDSK operation checks files at about 1 per second in stage 4 of 5, verifying file data.
    Moderators: please leave this open until it is actually resolved.
    Earlier posts:
    Panajev
    Posts: 4
    From: ITALY
    Registered: Oct 14, 2009
    Windows 7 x64, MacBook Pro, frequent CHKDSK after HDD firmware update
    Posted: Nov 2, 2009 6:45 AM
    Hello, I have been having filesystem problems on my Windows 7 partition since the HDD related firmware update (the latest Performance update) was released and installed onto this mid 2009 MacBook Pro.
    The HDD is a 500 GB 7200 RPM model, but it never gave me any troubles under OS X before the 'fix' and I know other users had intermittent problems with the HDD on their MacBook Pro's related to the HDD making noises and pausing.
    The fix was released, I installed it and I started seeing my first problem in Windows 7 x64 a few days after... I cleanly shut the OS down, but when I booted it back it asked me to perform a coherency check to the Filesystem... I thought that the problem was related to the fact that I was using the RC1 build of Windows 7... although that problem never manifested itself in the weeks before the Performance Update (HDD firmware fix) was installed and Windows 7 x64 RC1 had been on there and used frequently.
    I recently purchased Windows 7 retail a few days ago and after a bit of trouble-free operation I started having problems again... always shutting the PC down carefully and I was asked to run the CHKDSK utility at boot twice already.
    What to do?
    Message was edited by: Panajev
    MacBook Pro (2009) Mac OS X (10.6.1) Windows 7 x64, Bootcamp 3.0, recent HDD update
    nicegom
    Posts: 6
    Registered: Nov 12, 2009
    Re: Windows 7 x64, MacBook Pro, frequent CHKDSK after HDD firmware update
    Posted: Nov 12, 2009 1:40 AM in response to: Panajev
    Hi there,
    I have a different experience. I installed Windows 7 before the 'performance update 1.0' came out. I actually experienced the chkdsk launch problem with Windows 7. I had done repartitioning and clean-install several times but cannot solve the problem. So I tried to install XP and Vista on my MBA (Mid 2009 with SSD) and found that these two OS doesn't introduce such problem.
    To be honest, I'm not sure which caused such problem, Windows 7, a bootcamp driver, or EFI. But I'm sure that CHKDSK in Windows 7 has an obvious bug that needs to be patched (memory leak and maybe this problem as well). So now I'm using Windows Vista SP2. And I'm happy with Vista SP2 (seems to become faster and stable now).
    Cheer,
    Message was edited by: nicegom
    Macbook Air Windows Vista MBA of Mid 2009 with SSD

    Windows 7 x64 all updates
    Just doublechecking. Does that include the recent chkdsk hotfixes?
    [The Chkdsk.exe program does not start correctly on a Windows 7-based computer|http://support.microsoft.com/kb/975778]

Maybe you are looking for

Missing Driver For Hp Deskjet 930c Under Windows 10 - HP ...

  • I don't know how to connect my MacBook Pro to a printer shared by a Windows machine on my network. I have the Windows path to the printer but I don't know how to get Leopard to see the printer. (I tried the Windows tab in the Print and Fax control pa

  • Hi, In BP_CONT component, for address field I need to provide F4 help. And the F4 should contain the addresses with separate fields as (city.street,country).On selecting the row the data should flow as concatenated manner to the address field. Please

  • Greetings: Please either confirm and/or correct following proposed solution for Myfaces tiles. Issue: isert a tile definition and attribute in a pure jsf page. First passed solution: A hybrid of Jsp programming and Jsf. I was able to create a tile pa

  • Hi, in NEW GL which table is used as data source.?? regards

  • hi All, How to create new user and how i can grant all Privileges to the user. Can any one give reply. Which commands i can use. Thanks a lot in advance